 |
HITACHI ZAXIS ZX 130 Posted by: soeren66
Video duration: 180 seconds Global video hits: 203 Hitachi Bagger beim ausschachten einer Baugrube in der Hafencity Hamburg. Related: 130, bagger, egger, hafencity, hamburg, hitachi, tiefbau, zaxis, zx |
 |
FMS on LiveForSpeed Mixing Z axis data Posted by: tronicgr
Video duration: 252 seconds Global video hits: 10994 A demostration of how you can feel bumps and running over the curbs by mixing Z-data (heave) into the motion. It gets really interesting after the first 3 minutes... Related: full, heave, joyrider, liveforspeed, mixing, motion, simulator |
 |
Putting Tracks on a Zaxis 330 - Part II of Two Posted by: kimchiman1000
Video duration: 357 seconds Global video hits: 1482 In the last video, 'we' installed the track tensioners and idlers on the undercarriage. Now it's time to put the tracks back on! Related: 330, al, contracting, elemental, excavator, kimchiman, roy, tracks, zaxis |
 |
Installing track tensioners and idlers on a 330 Zaxis Posted by: kimchiman1000
Video duration: 255 seconds Global video hits: 511 Installing track tensioners and idlers on a 330 Zaxis excavator. Part one of two. Part two is the re-installation of the tracks. Related: 330, al, contracting, elemental, excavator, idler, install, installation, kimchiman, roy, track, tracks, zaxis |
 |
Hitachi Zaxis 350 LC-3 moving sand in a gravel pit Posted by: ArEs7210
Video duration: 274 seconds Global video hits: 219 Hitachi Zaxis 350 LC-3 moving sand from under a sand Conveyor in a gravel pit Related: 350, construction, excavator, gravel, hitachi, sand |
 |
Hitachi Zaxis 350 LC-3 and Cat D6R III moving sand Posted by: ArEs7210
Video duration: 329 seconds Global video hits: 487 Hitachi Zaxis 350 LC-3 and Cat D6R III moving sand for back fill in a gravel pit Related: 350, cat, construction, d6r, dozer, excavator, gravel, hitachi, pit |
 |
26: Sieg X2 Mini Mill cnc Z Axis Convertion part1 Posted by: quadrant2005
Video duration: 599 seconds Global video hits: 6198 This is part 1 of 3 for the convertion of the z axis of a sieg or equivalent mini mill to cnc control Related: cnc, mill, mini, sieg, x2 |
 |
Hitachi Zaxis 130 360 Excavator Posted by: DingleZilla
Video duration: 596 seconds Global video hits: 5883 Chucking a load of sludge back with this Hitachi 360 machine. Not a bad device, but a bit light on the back end with a full bucket load. The bucket isn't all that big either, yet it is easy to get the machine nodding. Better than doing the job by th'and tha nos. Related: 130, 360, excavator, hitachi, jcb, js130, machine, zaxis |
 |
Z-axis electronic Height Gauge tutorial Posted by: saunixcomp
Video duration: 87 seconds Global video hits: 3684 A demonstration of the electronic height gauge used to set your z-axis / tool height in Mach 3. Product is available for ~$95.00 from Enco. Part #NP636-7044 http://www.use-en co.com/CGI/INSRIT?PM AKA=NP636-7044 Check out www.nyccnc.com for details! Related: bob, bobcad, cad, cam, cnc, gauge, height, mach, mach3, mill, milling, taig, tool, v22, z-axis |
 |
Hitachi Excavator ZAXIS 250 LCN Bagger in action Posted by: BFLMedien
Video duration: 155 seconds Global video hits: 2418 The Hitachi Excavator ZAXIS 250 LCN in action ... Ein zweiter kurzer Clip des Hitachi ZAXIS 250 LCN Baggers bei der Arbeit. Wüba Abriss in VS-Villingen... Related: 250, abriss, bagger, baumaschine, building, demolition, excavator, hitachi, kettenbagger, lcn, wüba, zaxis |
 |
9x20 CNC Lathe Z axis overview and MDI test Posted by: dareposte
Video duration: 85 seconds Global video hits: 51 This is another video of the process of converting my 9x20 lathe to CNC. It shows the basic set-up and then shows it move 10mm, and me failing to read my dial indicator through the camera. Related: 9x20, ballscrew, cnc, lathe, motor, stepper |
 |
hitachi zaxis 280 lch-3 Posted by: baris34baris
Video duration: 198 seconds Global video hits: 8409 zaxis hitachi enka makina ekskavatör excavatör kato paletli komatsu kobelco daewoo doosan hyundai hidromek cat caterpillar Related: film, short |
 |
27: Sieg X2 Mini Mill cnc Z Axis Convertion part2 Posted by: quadrant2005
Video duration: 546 seconds Global video hits: 2171 This is part 2 of 3 for the convertion of the z axis of a sieg or equivalent mini mill to cnc control Related: cnc, mill, mini, sieg, x2 |
 |
Hitachi Zaxis 650 Posted by: dertip
Video duration: 147 seconds Global video hits: 9489 Obra Ave Santiago ourense Related: ave, construccion, hitachi, zaxis |
